How it works?

• If you do nothing for more than 4.5 seconds while installing the alarm, your LUMA will automatically return to the time screen. Be sure to take action within 4.5 seconds to continue the alarm installation.
• Confirming actions: To confirm each setting (such as changing from hours to minutes or saving the set time), press and hold the button for 3 seconds.
  

Can't do it all at once? No worries, you can simply restart by holding the button again for 3 seconds when you are on the time screen. Then the hour will start blinking again.

Turn on your LUMA by pressing the button once. You will now see the time to be adjusted. Press and hold the button for 3 seconds to start the adjustment process. First, the "hour" indicator will begin to flash. Use the button to set the hour, then press the button again for 3 seconds to switch to the "minutes." Repeat this process to set the minutes, month, day, and year. You can also choose between a 12-hour or 24-hour clock format.

After completing all settings, do not press any more buttons for 8 seconds; the LUMA will save the data and return to standby mode. Thus, your device is fully set up and ready to use!

• Alarm Set: To set the alarm clock, press the button 5 times to display the first alarm group. If "A1 OF" is displayed, it means the alarm clock is off by default. To turn it on, press and hold the button for 3 seconds. The hour begins to flash - press the button to set the hour. Once the hour is set, press and hold the button again to switch to the minutes. After setting the minutes, press and hold the button again for 3 seconds to save the alarm. The alarm is now activated.

Note: Once you set the alarm clock, it will go off at the same time every day until you turn it off or adjust it yourself. This is useful if you
have a fixed alarm time you then only have to set the alarm once.

To check the battery level of your LUMA, press and hold the button for 3 seconds while the device is in idle mode. It will then display the percentage.